Underground Drilling Machines
E100
FULL HYDRAULIC UNDERGROUND DRILLING MACHINE
E100 is a hydraulic drill produced for coring and drilling in narrow tunnels, underground galleries and on the surface. Thanks to its small structure, it is easy to assemble and easily transported. Thanks to its stepless controlled hydraulic motor, its rotation speed can be adjusted from 350 revolutions per minute to 2200 revolutions per minute.
It can be used by one person. There are electric motor or diesel motor variants available. By opening the Morset to the side, well cleaning and grouting works can be done easily. E100 has automatic morset and rod holder synchronization feature to hold rods.
| DRILLING CAPACITY | Rod Diameter | AW | AWL |
|---|---|---|---|
| Depth (m) | 100 | 120 | |
| Depth (ft) | 330 | 395 | |
| TOWER SLIDE SYSTEM | Feeding Length | 850mm | |
| Feed and Pull Force | 21 kN - 16 kN | ||
| Feed Speed | 0,8 m/s - 1 m/s | ||
| Drilling Angle | 0° - 180° | ||
| Rod Tensile Capacity | 750mm | ||
| POWER UNIT | Brand | GAMAK | |
| Power | 21,7 kW | ||
| Engine Type | Electric | ||
| HYDRAULIC SYSTEM |
First Pump | 280 bar | 35 cc/rev |
| Second Pump |
180 bar | 19 cc/rev | |
| Third Pump |
160 bar | 6 cc/rev | |
| Hydraulic Oil Cooling | Water Cooling | ||
| SPINDLE UNIT | Speed | 550 rpm - 2.000 rpm | |
| Torque | 350 Nm 1475 LBF | ||
| ROD HOLDER JAW |
Type | Hydraulic | |
| Maximum Inner Diameter | 49mm | ||
| Holding Capacity | 11 kN | ||
Etiketler#e100
İçerik 637 kez listelendi
