Ground Drilling Machines
EXTREME X8
FULL HYDRAULIC DRILLING DRILL
Extreme X8 is a hydraulic drill produced for coring and drilling in underground galleries and on the surface. It can be mounted on different chassis, for example on a sled, on a three-wheeled tractor, on a narrow or wide pallet. Different slide lengths can be made according to your needs. Stepless Thanks to its controlled hydraulic motor, the rotation speed can be adjusted from 50 to 1400 revolutions per minute.
There are electric motor or diesel motor variants available. By opening the Morset to the side, well cleaning and grouting works can be done easily. X8 has automatic morset and rod holder synchronization feature to hold rods. There are hydraulic tensioners mounted on the skid for fixing.
X8 is also available with optional accessories; for example the larger wireline drum, the cat head or the double speed hydraulic water pump.
| CAPACITY | BW | NW | HW | PW |
| 2000 m | 1450 m | 970 m | 440 m |
| WIRELINE | Capacity | 300 m - 2200 m with 6 mm rope | |
| POWER UNIT | Brand | DEUTZ | GAMAK |
| Model | BFL913C | ||
| Number of Cylinders | 6 Silindir | ||
| Power | 170 kW 220 Hp | 130 kw | |
| Cycle | 2.300 rpm | 2.300 rpm | |
| Engine Type | Diesel | Electric | |
| Fuel tank | 100 lt | ||
| Cooling | Air | ||
| HYDRAULIC SYSTEM | DIESEL ENGINE | ELECTRIC ENGINE | |
| First Pump | 280 bar - 220 lt / min | 280 bar - 190 lt / min | |
| Second Pump | 200 bar - 45 lt / min | 200 bar - 45 lt / min | |
| Third Pump | 160 bar - 19 lt / min | 160 bar - 6 lt / min | |
| Oil tank | 235 lt | 235 lt | |
| Hydraulic Oil Cooling | Water and Air Cooling | ||
| SPINDLE UNIT | Speed | 50 rpm - 1400 rpm | |
| Torque | 2420 Nm | ||
| ROD HOLDER JAW | Type | Hydraulic opening - closing | |
| Maximum Inner Diameter | 114 mm | ||
| Holding Capacity | 150 kN | ||
| MUD PUMP | Type | Triplex | |
| Flow Max | 135 lt / dk | ||
| Pressure | 70 bar | ||
| TOWER AND SLIDE SYSTEM | Feeding Length | 3300mm / 1800mm / 850mm | |
| Feed Speed | 0,5 m/s - 1 m/s | ||
| Feed and Pull Force | 64 kN | ||
| Drilling Angle | 0° - 90° | ||
| FLOOR ELEMENTS | Walking System | Skid, Wheeled, Truck Mounted, Crawler | Crawler max walking speed 2,5 km/h |
| Holding Capacity | 4 Hydraulic Lifters | ||
| MACHINE SIZES AND WEIGHT | WALKING POSITION | DRILLING POSITION | |
| Length | 3700 mm - 146 in | ||
| Width | 1480 mm - 58 in | ||
| Height | 1710 mm - 67 in | ||
| Weight | 3550 kg | ||
| Climb Angle | 36 | ||
