Ground Drilling Machines
E400
FULL HYDRAULIC SURFACE DRILLING DRILL
E400 is a hydraulic drill produced for coring and drilling in underground galleries and on the surface. It can be mounted on different chassis, for example on a sled, on a three-wheeled tractor, on a narrow or wide pallet. Different sledge lengths can be made according to your needs.
Thanks to its stepless controlled hydraulic motor, the rotation speed can be adjusted from 50 to 1000 revolutions per minute. There are electric motor or diesel motor variants available. By opening the Morset to the side, well cleaning and grouting works can be done easily.
E400 has automatic morset and rod holder synchronization feature to hold rods. There are hydraulic tensioners mounted on the skid for fixing. The E400 is also available with optional accessories; eg larger wireline drum, cat head or dual speed hydraulic water pump.
| CAPACITY | AW | BW | NW | HW |
| 650m | 500m | 350m | 150m |
| WIRELINE | Capacity | 5300 m - 1000 m with 5 mm of rope | |
| POWER UNIT | Brand | DEUTZ | GAMAK |
| Model | F6L913 | ||
| Number of Cylinders |
6 Cylinders |
||
|
Cylinder Volume |
5.6 lt | ||
| Power | 84 kW 114 Hp | 45 kW - 55 kW | |
| Cycle | 2.300 rpm | 2.300 rpm | |
| Engine Type | Diesel | Electirical | |
| Fuel Tank | 100 lt | ||
| Cooling | Air | ||
| HYDRAULIC SYSTEM | DIESEL ENGINE | ELECTIRICAL ENGINE | |
| First Pump | 280 bar - 80 lt / min | 280 bar - 80 lt / min | |
| Second Pump | 200 bar - 55 lt / min | 200 bar - 55 lt / min | |
| Third Pump | 160 bar - 6 lt / min | 160 bar - 6 lt / min | |
| Oil Tank | 84 kW 114 Hp | 45 kW - 55 kW | |
| Hydraulıc Oil Cooling | Water and Air Cooling | ||
| SPINDLE UNIT | Speed | 50 rpm - 1000 rpm | |
| Torque | 2000 Nm 1475lbf | ||
| ROD HOLDER JAW | Type | Hydraulic on - off | |
| Max Inside Diameter | 114 mm | ||
| Holding Capacity | 23 kN | ||
| MUD PUMP | Type | Triplex | |
| Flow Max | 114 lt / dk | ||
| Pressure | 50 bar | ||
| TOWER AND SLIDE SYSTEM | Feeding Length | 3300mm / 1800mm / 850mm | |
| Feeding Speed | 0,5 m/s - 1 m/s 1.6ft/s - 3.2ft/s | ||
| Feed and Pull Force | 64 kN | ||
| Drilling Angle | 0° - 90° | ||
| FLOOR ELEMENTS | Walking System | Skid, Wheeled, Truck mounted, Crawled | Crawler max walking speed 2,5 km/h |
| Holding Capacity | 4 Hydraulic Lifters | ||
| MACHINE SIZES AND WEIGHT | WALKING POSITION | DRILLING POSITION | |
| Length | 4200 mm | 4170 mm | |
| Width | 2000 mm | 2000 mm | |
| Height | 2400 mm | 4005 mm | |
| Weight | 4500 kg | 9,920 lb | |
| Climb Angle | 36 | ||
